Operating conditions & safety

Configuration: dual-arm details apply only to dual-arm/mobile dual-arm robots. Older instructions differ in power timing, light names and homing motion; check the operational guidance and version notes on this page.

Safety Notice

To ensure the safety of both users and the robot, please read the following precautions carefully before use:

1. Professional Use Only:This product is intended for professional use. Individuals under 18 are not advised to operate the device. The operation should only be performed by persons with relevant technical knowledge or under the supervision of qualified personnel.
2. Keep Out of Reach of Children: Prevent children from approaching or interacting with the robot. In environments where children are present, take extra preca utions and ensure the robot operates only in safe and supervised conditions.
3. Idle Protection: Do not leave the robot powered on and unattended. Activate mechanical or software-based suspension protection to prevent unintended movement.
4. Safe Operating Environment: Keep the operating area clear of obstacles at all times. Use safety restraints or tethers when necessary toprevent accidental movement, tipping, or injury.
5. Maintain a Safe Distance: Always keep the robot within your line of sight. Maintain a minimum distance of 1 meter (3 feet) from the robot during operation.
6. Handling Precautions: Do not touch the robot,s joints or actuating components immediately after power-on or during transportation, as unexpected movement may cause pinching or impact injuries.
7. Low Battery Warning: When a low battery warning is displayed, power off the robot and recharge the battery immediately to prevent unexpected shutdown, system malfunction, or damage.

Safety Warnings

Legal and Compliance Notice

The copyright and ownership of this manual belong to the manufacturer and its affiliates (collectively referred to as "the manufacturer"). Without written authorization from the manufacturer, no individual or organization may copy, scan, store, distribute, reprint, sell, transfer, modify, or otherwise use all or part of this manual for themselves or others. This manual and its contents are intended only for operating and using this product and may not be used for any other purpose.

To avoid illegal acts, possible injury, and losses, please strictly observe the following requirements:

1. For safety precautions, refer to the Safety Notice. Before using this product, carefully read this document and the Safety Notice to understand your rights, responsibilities, and legal terms. Failure to comply may result in property loss or safety hazards. By using this product, you indicate that you fully understand and accept all terms in this document. Operate strictly according to the instructions and take full responsibility for your actions and any related consequences. The manufacturer assumes no responsibility for injury or loss caused to relevant personnel due to improper operation.
2. Unauthorized disassembly, modification, or non-standard repair of the product is strictly prohibited. The manufacturer is not responsible for equipment faults or damage caused by such actions.
3. Do not use this product in extreme environments, such as high temperature, low temperature, or corrosive chemical environments. The manufacturer is not responsible for equipment issues caused by such conditions.
4. Under normal use conditions, issues caused by natural component wear or battery aging are not considered product quality issues, and the manufacturer assumes no responsibility for them.
5. This product must not be used for any activity that endangers national security, including but not limited to support for terrorism, nuclear facilities, biochemical weapon development, or the design and use of weapons of mass destruction.
6. Please confirm that you are not subject to any trade restrictions or sanctions; otherwise, you may not be able to use the manufacturer products and services normally.
7. The manufacturer is committed to ensuring product compliance worldwide. Please comply with the laws and regulations of your region and pay attention to relevant compliance requirements.
8. You must comply with the export-control laws and regulations applicable in your region.
9. You must undertake to use this product for legitimate purposes and agree to accept all terms in this document.
10. The manufacturer reserves the right of final interpretation of this agreement and may update or adjust it as needed.

Dual-arm configuration details · Safety and Responsibility Guidelines

The copyright and ownership of this manual belong to the manufacturer and its affiliates (collectively referred to as "the manufacturer"). Without written authorization from the manufacturer, no individual or organization may copy, scan, store, distribute, reprint, sell, transfer, modify, or otherwise use all or part of this manual for themselves or others. This manual and its contents are intended only for operating and using this product and may not be used for any other purpose.

To avoid illegal acts, possible injury, and losses, please strictly observe the following requirements:

1. Before using this product, carefully read this document to understand your rights, responsibilities, and safety instructions. Failure to comply may result in property loss or safety hazards. By using this product, you indicate that you fully understand and accept all terms in this document. Operate strictly according to the instructions and take full responsibility for your actions and any related consequences.
2. This product is not a toy and is not recommended for persons under 18 years old. Keep children away from the product and exercise special caution when operating it in environments where children are present.
3. This product should not be used in crowded areas. During use, ensure that people remain outside a 1 m radius from the robot. The manufacturer assumes no responsibility for injury or loss caused to relevant personnel due to improper operation.
4. Unauthorized disassembly, modification, or non-standard repair of the product is strictly prohibited. The manufacturer is not responsible for equipment faults or damage caused by such actions.
5. Do not use this product in extreme environments, such as high temperature, low temperature, or corrosive chemical environments. The manufacturer is not responsible for equipment issues caused by such conditions.
6. Under normal use conditions, issues caused by natural component wear or battery aging are not considered product quality issues, and the manufacturer assumes no responsibility for them.
7. This product must not be used for any activity that endangers national security, including but not limited to support for terrorism, nuclear facilities, biochemical weapon development, or the design and use of weapons of mass destruction.
8. Please confirm that you are not subject to any trade restrictions or sanctions; otherwise, you may not be able to use the manufacturer products and services normally.
9. The manufacturer is committed to ensuring product compliance worldwide. Please comply with the laws and regulations of your region and pay attention to relevant compliance requirements.
10. You must comply with the export-control laws and regulations applicable in your region.
11. You must undertake to use this product for legitimate purposes and agree to accept all terms in this document.
12. The manufacturer reserves the right of final interpretation of this agreement and may update or adjust it as needed.