Biped (EDU)

7. TRON 2 Biped Robot (EDU Version)

No.	Item Name		Qty	Unit
Flight Case (robot body and accessories)
1	Robot Body (Biped)		1	pcs
2	Battery		1	pcs
3	Battery Charging Dock		1	pcs
4	Power Adapter		1	pcs
5	Remote Controller (2.4 GHz Version)		1	pcs
6	Remote Controller Charging Cable		1	pcs
7	Developer Expansion Module		1	pcs
8	12 V Power Cable (Long)		1	pcs
9	12 V Power Cable (Short)		1	pcs
10	Communication Cable (Long)		1	pcs
11	Communication Cable (Short)		1	pcs
12	Power Cable (Male Connector)		1	pcs
13	Power Cable (Female Connector)		1	pcs
💡 Note: The male-connector and female-connector power cables are spare, detachable cables designed to be used together. They connect the Developer Expansion Module to the robot body and allow the cable to be disconnected easily when installing or removing the Mobile Stand.
14	Lifting Strap (Eye Bolt + Strap)		4	pcs
15	Body Foot Pad {pre-installed on body}		2	pcs
16	User Manual		1	pcs
17	Certificate of Conformity		1	pcs
18	Tool Kit (in Flight Case)	L-Wrench, M3	1	pcs
19		L-Wrench, M4	1	pcs
20		L-Wrench, M5	1	pcs
21		Cap Head Hex Screw, M3×8	10	pcs
22		Cap Head Hex Screw, M4×14 {for foot pad}	2	pcs
23		Cap Head Hex Screw Set (3 pcs), M5×18	10	pcs
24		Cap Head Hex Screw, M4×8	26	pcs
25		Flat Head Torx Screw, M3×6	4	pcs
26		Saddle Cable Tie Mount	4	pcs
27		L-Wrench (Torx), T10	1	pcs
28		Cable Tie	10	pcs
29		Cable Comb	2	pcs
Carton (roll-cage frames)
30	Front Roll-Cage Frame		1	pcs
31	Rear Roll-Cage Frame		1	pcs
32	Cap Head Hex Screw Set (3 pcs), M5×30		20	pcs